Questions? Call us.

Questions? Call us.

 

Available Positions

Production Material Processor- Pay Range $16-17 DOE

First Shift (5:30AM-4PM) Monday-Thursday (Friday is reserved for mandatory OT when applicable.)

Second Shift (1P-11:30PM) Monday-Thursday (Friday is reserved for mandatory OT when applicable.)

Weekend Shift (5AM-5:30PM) Friday-Saturday-Sunday*

*Weekend Shift Incentive: Work 36 hours but get paid for 40 hours!

Description: Remove and organize parts from steel sheets and record progress

The following duties will be required but not limited to:

  • Safely remove parts from steel sheets
  • Stack and organize parts for the next operations
  • Use hand tools to remove any tabbing or scale
  • Analyze each piece for surface quality defects
  • Accurately record completed work on computer
  • Able to work in groups or teams

Preferred Qualifications:

  • Forklift experience
  • Previous experience in manufacturing
  • Print reading experience is beneficial
  • Basic math
  • Good communication skills is a must
  • Able to lift up to 25 lbs repeatedly
  • Familiar with Microsoft Windows

 

Material Handler- Pay Range $17-20 DOE

Location: 301 P St Lincoln NE 68508

Shift: Monday – Thursday 5:30AM-4PM (Friday’s are reserved for mandatory OT when applicable)

Scope: Handling finished goods and work in process (WIP) with standing forklifts, pallet jacks, as well as by hand to safely transfer product to its correct location. You will also assist on the kitting line, as well as helping to feed parts to other departments for next step processing.

The following duties will be required but not limited to:

  • Practice smart operating techniques to ensure the safety of the entire team
  • Use Metalworks warehouse software to accurately log where product is located
  • Pick orders with standing forklifts and pallets jacks and load trucks according to schedule
  • Hand sort and stack parts when necessary
  • Wrap and package product coming out of production departments
  • Unload inbound trucks and place in warehouse utilizing warehouse software
  • Fill out trailer logs to ensure accurate load information
  • Visually inspect parts that are picked for any rust or noticeable flaws
  • Pulling non-conforming inventory and placing in quarantine location with proper labeling
  • Accurate job progress data recording (both handwritten as well as through Metalworks ERP system)

You will be provided on the job training.

A least two years of Forklift and warehousing experience is preferred.

 

Weekend Shipping and Warehouse Associate- Pay Range $17-20 DOE

Shift: Friday – Sunday 5AM-5:30 PM (Work 36 hours but get paid for 40!)

Scope: A Shipping and Warehouse team member will be handling finished goods and work in process (WIP) with standing forklifts, pallet jacks, as well as by hand to safely transfer product to its correct location. You may also assist on the kitting line as well as helping to feed parts to other departments for next step processing.

The following duties will be required but not limited to:

  • Practice smart operating techniques to ensure the safety of the entire team
  • Use Metalworks warehouse software to accurately log where product is located
  • Pick orders with standing forklifts and pallets jacks and load trucks according to schedule
  • Hand sort and stack parts when necessary
  • Wrap and package product coming out of production departments
  • Unload inbound trucks and place in warehouse utilizing warehouse software
  • Fill out trailer logs to ensure accurate load information
  • Visually inspect parts that are picked for any rust or noticeable flaws
  • Pulling non-conforming inventory and placing in quarantine location with proper labeling
  • Accurate job progress data recording (both handwritten as well as through Metalworks ERP system)

You will be provided on the job training.

STANDING Forklift and warehousing experience is required for this position. At least 2 years is preferred.

 

Press Brake Operator- Pay Range: $17-$20 DOE

First Shift (5:30AM-4PM) Monday-Thursday (Friday is reserved for mandatory OT when applicable)

The following duties will be required but not limited to:

  • Set-up of hydraulic CNC Press Brakes.
  • Forming parts to print and documenting progress.
  • Maintaining efficiency in high volume environment.
  • Maintaining minimum or preferably zero scrap levels.
  • Identifying material defects throughout the runs.
  • Ability to lift up to 45lbs repetitively for 10/hr shifts.

Required Qualifications:

  • 2 years minimum experience in Press Brake or similar machine operation
  • Previous experience in manufacturing
  • Print reading experience is beneficial
  • Basic math
  • Good communication skills is a must
  • Familiar with Microsoft Windows

 

CDL Class A Driver and Warehouse- Pay Range: $18 - $20 DOE

DOE Location: 5150 NW 40th St Lincoln NE 68524 First Shift: Monday-Thursday 6AM-4:30PM* (Friday is for mandatory OT when applicable) *Hours will need to be flexible, but you will be home every night!

Description: Safely transfer product to and from Metalworks facilities as well as a couple regional locations using all types of delivery vehicles within our fleet. This position will also share warehouse responsibilities with the rest of the team.

The following duties will be required but not limited to:

  • Practice smart operating techniques to ensure your safety, co-workers safety as well as the safety of the public
  • Maintain a valid Class A CDL with up-to-date medical card
  • Transport product between Metalworks facilities as well as to and from vendors using tractor trailers (53’), flatbed trailers, and pickup trucks. Actual windshield time may only be about 50% of your time
  • Assist in prepping and tagging of product at either facility. Loading and unloading work in process (WIP) with forklifts and pallet jacks as well as picking orders and loading trailers for deliveries
  • Deliver product to customers in a polite and professional manner with the understanding that you are the face that is representing Metalworks during those times
  • Verifying part numbers and counts on packing lists as it is being unloaded by customer to ensure document accuracy and quality
  • Become forklift certified in order to handle product going in and coming off truck (Certification provided by Metalworks)

You will be provided on the job training with “ride-a-longs” to get you familiarized with all locations associated with Metalworks customer and vendor base.

Experience is required for our CDL A positions. Requirements are a minimum of 1 year CDL A driving experience, or certification from a credited truck driver training program.

 

Welder- Pay Range $18- $20 DOE

DOE Location: 5150 NW 40th St Lincoln NE 68524

First Shift: 6AM-4:30PM Monday-Thursday (Friday is for mandatory OT when applicable)

Weekend Shift: 5AM-5:30PM Friday-Sunday (Work 36 hours but get paid for 40!)

Description: Metalworks is looking for a motivated, production-minded individual with a passion for quality to join the welding department.  As a Welder you will be responsible for creating a quality product while meeting production goals.

The following duties will be required but not limited to:

  • Reading blueprints and drawings and taking measurements to verify quality production
  • Determine the appropriate welding equipment or method based on requirements
  • Operate angle grinders to prepare/finish the welded parts
  • Align components using fixtures, calipers, rulers etc. and clamp pieces
  • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal)
  • Provide continuous improvement feedback to help increase productivity

Required Skills

  • Experience using MIG and/or TIG equipment
  • Experience in using electrical or manual tools (saws, squares, calipers etc.)
  • Ability to read and interpret technical documents and drawings
  • Knowledge of relative safety standards and willingness to use protective clothing
  • Attention to detail with an emphasis on quality and production efficiency
  • Minimum Qualifications AAS in Welding Technology or two years of welding experience
  • Proficient in English
  • Professional Certification (e.g. an AWS welding certificate) is a plus

 

Robot Forming Operator- Pay Range $17 - $20 DOE

Location: 301 P St. Lincoln NE 68508

First Shift: 5:30AM-4PM Monday-Thursday (Friday is for mandatory OT when applicable)

Description: The purpose of a Robot Forming Operator is to ensure the safe and efficient operation of all robotically automated forming cells at our P Street location. Team members will be responsible for set-up, operation and troubleshooting of all automated cells. 

The following duties will be required but not limited to:

  • Practice smart operating techniques to ensure the safety of the entire team
  • Set-up of new jobs on all cells
  • Efficient production operation with ability to meet proven job rates
  • Troubleshooting of faults experienced during automated production
  • Part inspections
  • Non-conforming part quarantine and labeling
  • Accurate job progress data recording (both handwritten as well as through Metalworks ERP system)

Experience will be necessary for these positions. If you do not have specific experience with the operation of the equipment we are hiring for, general manufacturing experience may be sufficient.

 

Robot Welding Operator- Pay Range $17 - $19

DOE Location: 5150 NW 40th St Lincoln NE 68524

First Shift: 6AM-4:30PM Monday-Thursday (Friday is for mandatory OT when applicable)

Weekend Shift: 5am - 5:30pm Friday – Saturday – Sunday (Work 36 hours but get paid for 40!)

Description: The purpose of a Robot Welding Operator is to ensure the safe and efficient operation of all robotically automated welding cells at our Air Park location. This shift is intended to help level load the welding department to minimize and ultimately eliminate the need for OT. These team members will be responsible for set-up, operation and troubleshooting of all automated cells. Although the shift will start out small, it does have the possibility to develop into a larger team depending on workload and team performance.

The following duties will be required but not limited to:

  • Practice smart operating techniques to ensure the safety of the entire team
  • Set-up of new jobs on all cells
  • Efficient production operation with ability to meet proven job rates
  • Troubleshooting of faults experienced during automated production
  • Part inspections
  • Non-conforming part quarantine and labeling
  • Accurate job progress data recording (both handwritten as well as through Metalworks ERP system)

Weekend Shift: You will be provided on the job training that will occur during the normal Mon – Thurs (6AM – 4:30PM) work week until you are ready to transition to the weekend shift. This however is not a pre-determined time period. You will transfer once we feel you are ready.

Experience will be necessary for these positions. If you do not have specific experience with the operation of the equipment we are hiring for, general manufacturing experience may be sufficient.

 

Machine & Facility Maintenance Apprentice- Pay Range $19-24 DOE

First Shift: Monday-Thursday, 5:30A-4PM with mandatory OT Fridays when applicable, and a rotation among the maintenance crew to be on-call for weekends.

Description: Metalworks Inc. is looking for a hard-working, motivated individual to fulfill a Machine & Facility Maintenance Apprentice position. This crew member will primarily be stationed at our 301 P St. location to troubleshoot, repair and maintain our laser equipment and machining to keep them fully operational. General facility maintenance of this location will also be required, including snow removal in the winter months.

General manufacturing maintenance experience & clean driving record is required. Laser-specific maintenance experience is preferred.

 

Lead CNC Machinist / Programmer- Pay Range $22-30 DOE

First Shift: 6 AM-4:30PM Monday-Thursday (Friday is reserved for mandatory OT when applicable)

Description: Metalworks is looking for a motivated, production-minded individual with a passion for safety and quality to join the machining department. As a Lead Machinist, you will be responsible for setting up several CNC mills with multiple axis and multi-axis lathes. While creating a quality product and meeting production goals.

The following duties will be required but not limited to:

  • Reading blueprints and drawings and taking measurements to verify quality production
  • Learn Metalworks Quality Management System
  • Machine programming and set-up
  • Provide continuous improvement feedback to help increase productivity

Required Skills:

  • Experience in multi-axis machining
  • Experience in using precision measuring tools (squares, calipers, mics etc.)
  • Ability to read and interpret technical documents and drawings. Familiar with GD&T
  • Knowledge of relative safety standards and willingness to use protective equipment
  • Attention to detail with an emphasis on quality and production efficiency
  • Must be a strong communicator
  • Able to train other machinists on different CNC machines

Minimum Qualifications:

  • 3-5 years of setup and machining experience required.
  • CAD / CAM experience required. Familiar with SolidWorks and SolidWorks CAM preferred.
  • Proficient in English
  • Machining Degree or Certificate from accredited Institution is a plus